May 11, 2010 · TTL is like many said the "Time To Live." This is set by default on the destination device, and if not modified, allows you the ability to tell what type of device is responding.

Aug 14, 2012 · TTL mean Transistor-Transistor-Logic and has its level for logical zero near 0V and for logical one near 5V. Often any 5V logic is called TTL, although most circuits nowadays …

Jun 22, 2023 · TTL requires that logic 1 input must be at least 2V, and TTL drivers are designed to guarantee that. That is far short of what this driver requires to register as logic 1.

I've been trying to find a good description of the TTL serial "standard" without much luck. I understand that serial transmit (TX) and receive (RX) lines idle high (at VCC) and that they …

Aug 15, 2020 · USB转TTL是一种 串口通信 转换器，它可以将USB接口转换为TTL串口通信接口。 TTL串口通信是一种常见的数字通信方式，常用于单片机、传感器等设备之间的数据传输。 通 …

Dec 11, 2016 · A TTL UART will output (and input) only TTL levels, essentially 0 bit = 0V and 1 bit = 5V. And many modern-day gadgets (Arduino, et.al.) simply use TTL voltage levels for serial …

TTL（Time-to-Live）实际上是一个8比特的字段，在每个IP数据包的头部信息中都有这个字段。 TTL的主要作用是防止数据包在网络中无限制地传输或循环。

1. TTL电平 TTL指双极型三极管逻辑电路（transistor transistor logic），这种信号0对应0V，1对应3.3V或5V，与单片机、MCU、SOC的IO电平兼容。 不过实际也不一定是TTL电平，因为现在 …

Mar 10, 2018 · I've been having some issues lately with the usage of 10k ohm resistors as pull down resistors for 74ls series chips. Most people seem to choose 10k resistors as their default …

The signal is a TTL “low” when the output is negative, relative to zero volts (or the dc offset value)". Here is a comparison between the generated square wave and the sync signal: Here …