Here are additional instructions: for clogging issue, it is strongly recommended to first read this wiki article: How to check which part is clogged in H2D to confirm whether the clog is indeed …

I recently had an issue with not being able to feed filament into the left extruder path on the Bambu Lab H2D. I learned the cause of this was more simple than I anticipated.

Apr 16, 2025 · This article introduces how to disassemble and assemble the H2D extruder. It’s actually not bad, much quicker and nicer than the X1C. It is a little fiddly the first time as it’s not …

Subscribed 2 2 views 2 minutes ago #3dprinting #bambulab #h2d #3dprinting #bambulab #h2d #3dtisk #extrudererror #extruder #3dtiskarna #3dprinter...more

If the extruder gear is rotating properly but no filament is observed extruding from the hotend, follow this wiki H2D Hotend Unclogging Procedure to clear any clogs in the hotend.

Replace H2D Dual Extruder Idlers and Filament Sensor. Simply remove the cam directly. The extruder gear might be tight; if it cannot be removed directly, you can use an Allen key to …

May 1, 2025 · Anyone else finding the H2D extruder to be easily jammed? I’ve been able to clear mine by pulling out the ptfe tube and pushing a length of filament through to the nozzle; maybe …

This spring loaded plastic guide was stuck in the up position…. Problem solved!

If the filament is broken and stuck in the extruder, you’ll need to disassemble, clean, and reassemble the extruder. Refer to the H2D extruder disassembly and assembly wiki for step …

Apr 27, 2025 · Have you checked for debris in the switching mechanism? The wiki is always a good place to start. https://wiki.bambulab.com/en/h2d. Technically**, it’s suggested to use the …