On a Selectrix layout the decoder must first its address programmed. The data format will then be automatically be switched to “Selectrix only” (CV49, Bit 4 = 1). The decoder can then only be switch to another data format by DCC programming.

The decoder can be programmed with the Intellibox, DCC, Märklin and Selectrix controllers and Selectrix programming devices. CV's can be programmed with all devices.

The locomotive decoder DH05A/B, DH10A/B and FH05A are compatible with the protocols of SelecTRIX Standard SX1 / SX2 as well as with NMRA-DCC-Standard. They can be controlled by every central control

Jul 7, 2021 · Der Sx-Decoder liest vor der Programmierung der Parameter die alten Werte von der Zentrale aus und speichert sie im EEPROM ab (Backup). Nach der Programmierung werden die vorherigen Werten aus dem EEPROM wieder an die Zentrale übertragen (Restore).

It is absolutly necessary to read the whole manual in order to understand and use all Intellibox features. You need a transformer with 16 V AC output voltage and a minimum output power of 52 VA. Use wires with max. diameter 1.1 mm (cross sectional area = 1 mm2, 18AWG).

Nov 25, 2009 · This is the latest Selectrix decoder which is switch-able between DCC and Selectrix. It should work on my DCC system, the instructions say that by programming it in DCC that switched it... Below is from the Trix site

Mar 23, 2005 · Just order our modern central units as for instance the central unit ZS1 to expand the decoder settings (new decoder family DHP) and the control response of the complete system. Selectrix offers excellent handling characteristics!

Colleagues: As I proceed, limp, crawl, and hunch to completing the DC layout I never finished as a kid, I've discovered that two of my minitrix locos have 6-pin NEM651 female sockets, but were built to use the proprietary ministrix selectrix digital control system.

Das Interface verwendet nur die Anschlüsse PIN 2, PIN 3 sowie PIN 5 seines 9 poligen Steckers, die anderen Leitungen dienen dazu, den Hardware - Handshake des PC abzuschalten, sie sind nicht immer nötig (hängt vom verwendeten Programm ab).

It is suitable for digital locomotives with a 6-pin NEM interface connector. Can be used universally in Selectrix 1, Selectrix 2, and DCC formats. Automatic analog recognition.