This paper will describe the migration of CSP equipment from a conventional method to a fully integration assembly and strip test manufacturing method. This paper will also present the detail program and support with test results to ensure manufacturability and reliability of the manufacturing process.

Strip testing promotes parallel testing of multiple units at the same time, increasing test throughput and reducing test cycle time. After strip testing, traditional end-of-line operations are performed, including mark, device singulation, vision sort, tape and reel, packing, labeling and shipping.

Jul 1, 2000 · One solution is a new matrix approach to end-of-line processing that uses standard leadframe strips to integrate massive parallel assembly and testing. This high-density leadframe (HDLF)...

Bias needles besides the bare module serve as reference point to the sensor masks. Laser-based Relative distance measurement between both sensor edges along the module side. Only gives the edge alignment. Optical measurement of the dicing edges necessary to …

Aug 1, 2024 · With precise assembly, the 2S module meets strict mechanical criteria, achieving angular displacement of −22 μrad between sensors, −4 μm translational displacement perpendicular, and −13 μm parallel to strips.

1. With the module removed from the receiver frame, use a 5/ 64 Allen wrench or Phillips head screwdriver to remove the two 2-56 screws from both sides of the top of the module (Figure B). 2. Grasp the module halves and apply force in opposite directions, rocking the ends of the module while slightly pulling the top of the module away from the ...

ALPHA is a low energy antiproton experiment located at the CERN’s AD. ALPHA routinely pro-duces cold antihydrogen in presence of a neutral atom trap [1], and recently also demonstrated its ability to trap some of the antiatoms and keep them confined over a long period of time [2, 3].

Jan 30, 2025 · The Alpha 520 automatically cuts, strips and crimps wire and cable. Its fully programmable Z-axis optimizes the crimping process by automatically adjusting the vertical height of the crimping module. This reduces changeover times.

Open a PDX assembly; Defined the size of each module by opening strip assembly > PDX Strip > Edit Strip > Modules; Click PDX Tools > Define Plates > select plates > Edit > Move > Transfer > select a module and check Fit to Module > OK, noticed that the size of the selected plates will change accordingly to fit the module size; Modify the module ...

Sep 24, 2018 · 21 Robotic assembly promotes a shorter production time, reduces a ‘standing army’ problem when unforeseen delays arise, and leads to uniformity of production assembly technique. We plan to use a gantry system for ATLAS Upgrade strip (and pixel) module assembly at …