Press and hold the Start/Clear/Stop button for 1-2 seconds. The display will say STOPPED and show only the number of days collected. Now you can download your data. Questions about …

The ability to reset a logger is enabled or disabled in the Advanced Settings tab when configuring the VFC400-USB via Control Solutions VTMC. Page 62: Hibernating A Vfc400-Usb If you …

STEP 4: Restart Data Recording • Take your finger off the START, CLEAR, STOP button and the screen should have READY displayed. • The data logger will now start recording and the …

If your data logger is in the not ready mode, it will need to be configured before you are able to re-start your data logger. If you haven’t performed your initial configuration, you will need to do …

After 30 seconds of inactivity the logger will automatically revert to display the current temperature. Press the Start/Clear/Stop button quickly to immediately return to the current …

Before sticking on the Wall Mount, make sure the sensor cable and the USB cable from the VFC400-USB can both reach the device comfortably without obstruction or at risk of being …

To start the VFC400: hold the start button down; the word “starting” will display. A second later the word ready disappears; when the word ready disappears you must remove your thumb/ finger …

WHEN CHANGING SETTINGS CHANGE ONLY THE HIGHLIGHTED AREAS – SET RECORDING DAYS TO 45 DAYS AND 10 MINUTE READINGS INTERVALS. PLEASE …

Starting your VFC400-WiFi Press and hold the START/ Clear/Stop button. STARTING will appear along with READY. Release the button once READY disappears. The VFC400-WiFi now …

STEP 5: Operation of the VFC 400 . Starting The Logger . The VFC 400 is recording temperature data once READY disappears. Release the button within two seconds and STARTING will …