- Advanced Technology Attachment
- According to 2 sources
- See moreSee all on Wikipedia
Parallel ATA - Wikipedia
Parallel ATA (PATA), originally AT Attachment, also known as Integrated Drive Electronics (IDE), is a standard interface designed for IBM PC-compatible computers. It was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives. The connection is used for storage … See more
The following table shows the names of the versions of the ATA standards and the transfer modes and rates supported by each. Note that the transfer rate for each mode (for example, 66.7 MB/s for UDMA4, commonly called "Ultra-DMA 66", defined by ATA-5) gives its … See more
• Advanced Host Controller Interface – Computer standard for SATA host controllers
• CE-ATA – Interface for small hard drives
• FATA (hard drive)
• INT 13H – BIOS interrupt call for disk access See moreParallel ATA cables transfer data 16 bits at a time. The traditional cable uses 40-pin female insulation displacement connectors (IDC) attached to a … See more
ATAPI Removable Media Device (ARMD)
ATAPI devices with removable media, other than CD and DVD drives, are classified as ARMD … See moreWikipedia text under CC-BY-SA license What is ATA (AT Attachment)? - Computer Hope
ATA is an interface that connects hard drives, CD-ROM drives, and other drives. Learn about the evolution of ATA from ATA-1 to ATA-6, the features and transfer r…
- Published: Aug 2, 2020
What's the difference between ATA, PATA, and IDE?
Both are part of the ATA standard, and use the same logical command sets, but SATA obviously has a different electrical interface. Both types of drives (SATA and PATA) are IDE devices. …
- Reviews: 1
ATAPI - Wikipedia
ATAPI (ATA Packet Interface) is a protocol used with the Parallel ATA (IDE) and Serial ATA standards so that a greater variety of devices can be connected to a computer than with the ATA command set alone. It carries SCSI commands and responses through the ATA interface.
ATAPI devices include CD-ROM and DVD-ROM drives, tape drives, magneto-optical drivesWikipedia · Text under CC-BY-SA license- Estimated Reading Time: 2 mins
Hard Disks – What IS ATA and Ultra ATA?
The original ATA interface is based on transistor-transistor logic (TTL) bus interface technology, which is in turn based on the old industry standard architecture ( ISA) bus protocol. This protocol uses an asynchronous data …
- bing.com › videosWatch full video
IDE, ATA, PATA and ATAPI Interface, What is it and …
Jan 26, 2021 · Parallel ATA (PATA), originally AT Attachment and also known as ATA or IDE, is a standard interface created by Western Digital and Compaq in 1986 to connect hard drives and CD / DVD drives to the motherboard of a PC, …
Advanced Technology Attachment (ATA) - CIO Wiki
Advanced Technology Attachment (ATA) is a standard physical interface for connecting storage devices within a computer. ATA allows hard disks and CD-ROMs to be internally connected to …
Understanding ATA Connectors: A Gateway to Efficient Data Transfer
What Is an ATA Connector? An ATA connector, part of the broader ATA interface standard, is designed to link storage devices like hard drives and optical drives to a computer’s motherboard.
P-ATA / IDE interface and cable pins and signals
Jun 6, 2022 · Advanced Technology Attachment (ATA), is a standard interface for connecting storage devices such as hard disks and CD-ROM drives inside personal computers. Nowdays superseeded by SATA ( see SATA pinout ).
SATA - Wikipedia
A 3.5-inch Serial ATA hard disk drive A 2.5-inch Serial ATA solid-state drive. SATA was announced in 2000 [4] [5] in order to provide several advantages over the earlier PATA interface such as reduced cable size and cost (seven …
43
