Because the module has two L9110 chips, it can drive two independent DC motors. Surprisingly, the L9110 dual-driver module works with DC voltages from 2.5 to 12 V, caters continuous current of 800 mA, ...

Motor controller programmes through Arduino IDE ClearCore CLCR-4-13 is an industrial IO and motion controller that can be programmed using the Arduino IDE. It handles up to four axes of ...

Brushless motors are ubiquitous in RC applications and robotics, but are usually driven with low-cost motor controllers that have to be controlled with RC-style PWM signals and don’t allow fo… ...

After construction and pre-flight test, the module was connected to an Arduino board and measured the rotation per minute (rpm) rate of a geared robo motor (150rpm@5V) with the help of a home-made ...

Locomotion is provided by a double geared-motor module. ... It uses an Arduino and a motor shield for locomotion, with commands pushed to it via USB. This setup makes programming very easy.

AMD has introduced a motor driver starter kit for its Kria K24 system-on-module – which is built around a Zynq UltraScale+ IC and measures 60 x 42 x 11mm. The kit, called KD240 drives starter kit, ...