In final form, a Bluetooth module and Arduino Pro Micro are stuffed inside ... it’s as simple as tying a certain pin to another via a resistor, and the head unit can be switched to the CD ...

I cut the trace leading to the Bluetooth interface module and soldered a wire so the switch now pulls an Arduino pin to ground when pressed. A few pieces of internal plastic reinforcements for ...

The PAN B511-1C Bluetooth module will be certified for CE RED, FCC, ISED and MIC. Samples are already available now and the ...

The Arduino Shield is a neat piece of hardware that sits ... out to a separate 4-pin female header along with 3.3V and GND for connecting a 4-pin 3.3V Bluetooth module or a TTL serial device. Likewise ...

The Curie module also has Bluetooth Low Energy built-in ... The top of the unit looks very similar to the Arduino Uno; the pin layout is identical to that of the Uno, so shields will easily ...

Now, since we have built-in BT support on Intel® Edison, you can use Edison module with Arduino ... bluetooth-service.tar.gz ./ 4 tar -xvf bluetooth-service.tar.gz 3. Copy bluetooth-spp-pin ...

Just reverse the receive (Rx) and transmit (Tx) lines between your Arduino and Bluetooth module, and provide the proper input voltage level. This method requires zero software pairing; your device and ...